Precautions for spray powder? Do you know several points?
Powder coating is to use powder spraying equipment (electrostatic spraying machine) to spray powder coating on the surface of the workpiece. Under the action of static electricity, the powder will be evenly adsorbed on the surface of the workpiece to form a powder coating; the powder coating is baked at high temperature. Bake leveling and curing, and become the final coating with different effects (different types of powder coatings); the spraying effect of powder spraying is better than that of spray painting in terms of mechanical strength, adhesion, corrosion resistance, aging resistance, etc., and the cost is also higher. Under spray paint with the same effect.
(1), surface treatment
In order to make full use of the characteristics of powder coating and prolong the service life of the coating film, the surface of the object to be coated must first be strictly pre-treated.
(2) spraying efficiency
When spraying, the object to be coated must be completely grounded to increase the spraying efficiency of powder coating.
(3) smooth and smooth
For the coated object with large surface defects, conductive putty should be applied to ensure the smoothness and smoothness of the coating film.
(4) Temperature time
After spraying, objects need to be heated and cured. The curing conditions are subject to the technical specifications of powder products, but the curing temperature and time must be fully guaranteed to avoid quality accidents caused by insufficient curing.
(5) Check for defects
Check immediately after powder spraying, if defects are found, they should be dealt with in time. If defects are found after curing, the range is small and only local without affecting the surface of the coated object. It can be repaired by diluting the same color powder with acetone. If the range is large, it will affect the surface Quality, after sanding, spray again or use paint remover to remove the coating, and then re-spray.
(6) Remove debris
Recycled powder must be screened to remove impurities, and then mixed with new powder in a certain proportion.
(7) Powder pollution
The powder supply barrel, powder spraying room and recovery system should avoid the pollution of other powders of different colors, so they must be cleaned every time the color is changed.
Print Area is professional in printing industry 20+ years.
Security Paper:Watermark Paper,UV Fiber Paper,Thread Paper
Security Ink:OVI,UV Invisible Ink,Magnetic Ink,Water Sensitive Ink,Watermark Ink,Glow in Dark Ink
Offset Ink:Soy Bean Offset Ink,UV Offset Ink
Printing Materials:PS Plate,Rubber Blanket,Underpacking Foil,Underpacking Paper.
Machine:Die Cutting Machine,Offset Machine,UV Flexo Machine,UV Coated Machine ect.
Please don’t wait and contact with
Caroline:+8618026391301(wechat & whatsapp avaliable.)
Email:fluorescentink@yyink.com
Web:www.printarea.cn